MMA275 1/2-inch Pressure-field Microphone

You are here: Home > News > New Product Launch

return

MMA275 1/2-inch Pressure-field Microphone

2023-10-30

MMA275 is the 1/2-inch pressure-field microphone developed by BSWA. It is suitable for pressure-field environments such as in cavity, near a hard reflective surface, or installed flush with a hard surface. It doesn’t require external polarization voltage and equipped with built-in ICCP power supply preamplifier (optional TEDS).

MMA275 is front-vent and can measure the sound pressure level up to 132 dB in the frequency range of 50 Hz ~ 10 kHz (±3 dB).

MMA275 is suitable for applications which need a large number of microphones with critical cost requirements, such as array applications including near-field acoustic holography (NAH), beamforming, etc.

BSWA can perform phase-matching of microphones before delivery for the users who have phase requirements. If the phase is not required when ordering, the microphone phase will not be tested and matched.

Moreover, the optional TEDS function support data acquisition equipment to read microphone information directly, including microphone model, serial number, sensitivity, etc. BSWA microphone supports the IEEE 1451.4 standard. The v0.9 version is used by default to be compatible with more data acquisition equipment. The v1.0 version can also be selected according to user requirements.

Each MMA275 is supplied with an individual calibration data chart including sensitivity, frequency response and so on.

Features:

● 1/2-inch pressure-field microphone

● Sensitivity (@250 Hz): 40 mV/Pa (-28 dB re 1V/Pa)

● Frequency response: 100 Hz ~ 5 kHz (±2 dB)

50 Hz ~ 10 kHz (±3 dB)

● Dynamic range: 32 dBA ~ 132 dB

● Polarization Voltage: 0V (prepolarized)

● Pressure equalization: front-vented

● Optional phase-matching

● Built-in preamplifier with ICCP power supply

● Optional TEDS (IEEE.1451.4)